English-33
Switching the Sound Off Temporarily
You can switch the sound off temporarily.
Example
: You wish to answer the telephone.
1 Press the
MUTE
button.
Result
:
The sound is switched off and
“
Mute
” is displayed
.
2 When you wish to turn the sound back on, press the
MUTE
button again or either of the volume buttons.
Result
: The sound comes back on at the same volume as before
and the
“
Mute
” indication disappears.
Selecting the Sound Mode
You can set the sound mode by pressing the "
DUAL I-II
" button.
When you press it, current sound mode is displayed on the screen.
If the receiving conditions deteriorate, listening will be easier
if the mode is set to
Mono
.
If the stereo signal is weak and automatic switching occurs,
switch to
Mono
.
Default
Automatic
change
DUAL 1
Automatic
change
DUAL 1
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
FM
Stereo
NICAM
Stereo
DUAL 1/2
MONO
STEREO MONO
DUAL 1 DUAL 2
MONO
MONO STEREO
MONO DUAL 1
DUAL 2
BN68-00751D-00Eng 7/26/04 7:44 PM Page 33
To Next Page
Loading...
