English-47
Coarse and Fine Tuning of the Image
The purpose of picture quality adjustment is to remove or reduce
picture noise. If the noise is not removed by Fine-tuning alone, then
adjust the frequency as best as possible (coarse) and Fine-tune again.
After the noise has been reduced, re-adjust the picture so that it is
aligned on the center of screen.
Press the
PC
button on the remote control to select the PC mode.
1 Press the
MENU
button.
Result
: The main menu is displayed.
2 Press the or button to select
Setup
.
Press the
ENTER
button
Result
: The options available in the
Setup
group are displayed.
3 Press the or button to select
PC
.
Press
ENTER
button.
Result
: The options available in the
PC
menu are displayed.
4 Press
ENTER
button again.
Result
: The
Image Lock
menu is selected.
5 Press the or button to select
Coarse
or
Fine
.
Press the
ENTER
button.
Result
: The horizontal bar is displayed.
6 Press the or button to adjust the screen quality.
Vertical stripes may appear or the picture may become blurry.
7 When you are satisfied with the settings, press the
MENU
button
to return to the previous menu or press the
EXIT
button to return to
normal viewing.
BN68-00751D-00Eng 7/26/04 7:45 PM Page 47
To Next Page
Loading...
