English-54
Installing the Wall Mount Kit
Note: This installation is to be used when attaching the wall mount to a concrete wall.
When attaching to other building materials, please contact your nearest dealer.
Components (Sold separately)
Wall-Bracket Set-Bracket Screw: 8EA
Wood Screw: 4EA
Anchor: 4EA
Installation Guide
How to assemble the Wall Mount Bracket
1 Mark the location of hole on the wall.
Make over 35mm-depth-hole on the marked location using drill.
Fix anchors on each hole on the wall.
Connect wall-bracket to the wall with wood screws after fitting
anchors into the wall-bracket
.
Note: If the bracket is not firmly fixed to the wall, LCD TV can fall off.
2 Turn the power off and unplug the power cord from the outlet.
Place the TV faced down on a soft cloth or cushion on a table.
Remove the four screws from the back of the TV.
Separate the stand from the TV.
Cover the bottom hole with a cap
Attach the set-bracket onto the rear side of the TV set and
secure the screws .
3 Insert three Hangers of the set-bracket into the grooves of the wall-bracket .
Fix set-bracket and wall-bracket with screws .
M4 X L15
M4 X L20
BN68-00751C-02Eng 9/7/04 10:03 AM Page 54
To Next Page
Loading...
