Samsung LE26A41B - Initializing the Image Settings

English-49
Initializing the Image Settings
You can replace all image settings with the factory default values.
Press the PC button on the remote control to select the PC mode.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the or button to select Setup .
Press the
ENTER button.
3 Press the or button to select PC .
Press the ENTER button.
Result
: The options available in the PC menu are displayed.
4 Press the or button to select Image Reset .
Press the
ENTER button.
Result: You can initialize all image setting to the factory default
values.
5 Press MENU button to return to the previous menu or press the
EXIT button to return to normal viewing.
BN68-00751D-00Eng 7/26/04 7:45 PM Page 49