To use the Lock function, follow these steps:
1. Select an application, and then open the Tools menu using your remote.
2. Select Lock. The Security window appears.
3. Enter your password.
4. A confirming message screen appears. Select OK. The message screen closes and a lock symbol appears to
left of the application.
• Unlock
✎
Depending on the application, this function may not be supported.
To use the Unlock function, follow these steps:
1. Select a locked application, and then open the Tools menu using your remote.
2. Select Unlock. The Security window appears.
3. Enter your security PIN using the remote. If you have not created a PIN, enter “0-0-0-0”.
4. A confirming message screen appears. Select OK. The message screen closes and the lock symbol to left of
the application disappears.
• Information
You can view the detailed information about the selected application.
✎
Depending on the application, you can also lock or unlock the application on the Detailed Information screen.
To Next Page
Loading...
