Connecting the Power Cord and the Aerial or Cable Connection
ANT OUT
Power Input
or
Cable
Aerial Cable (Not Supplied)
VHF/UHF Aerial
✎
Plug the power cord into a wall outlet only after you have made all other connections.
✎
If you are connecting your product to a cable or satellite box using HDMI, Component, or Composite connections,
you do not need to connect the ANT IN jack to an aerial or a cable connection.
✎
Connect the power adapter to DC 14V on the rear of the product. Connect the power cord to the adapter and wall
socket. (The input voltage is switched automatically.)
✎
Use caution when you move or tilt the product if the aerial cable is tightly connected. You could break the aerial
jack off the product.
Getting Started
English - 20
To Next Page
Loading...
