Managing the Network Devices
Wi-Fi Direct
Menu → Network → Wi-Fi Direct
Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices to
your product directly without a router.
✎
To use this function, your mobile device should be supported by the Wi-Fi Direct.
To connect your mobile device with your product using Wi-Fi Direct, follow these steps:
1. Go to the Wi-Fi Direct screen (Network → Wi-Fi Direct). The product starts to search devices, and then displays
the devices on the Wi-Fi Direct screen.
2. Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device.
– For PBC: Press the WPS(PBC) button on your Wi-Fi device within 2 minutes. The Connecting popup
appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi
Direct screen as connected.
– PIN: Input the displayed PIN on your device.
✎
If you want to disconnect the device, select the connected Wi-Fi device, and then select Disconnect. The
Connecting popup appears, followed by the Connected pop-up. When it closes, you should see the device
listed on the Wi-Fi Direct screen as connected.
✎
The product and BD products perform the role of the Group Owner. If a product or BD is connected via Wi-Fi
Direct, the connected device is represented as a Group Owner in the Wi-Fi Direct list. However, even in this
case, the product cannot connect to another product or BD through Wi-Fi Direct.
To Next Page
Loading...
