Using the Keypads and Keyboards
A number of Smart Hub applications display a numeric keypad or a QWERTY keyboard so you can enter account
names, passwords, and other data. In most applications, you can toggle between the numeric keypad and the QWERTY
keyboard by selecting the b button.
Using the Numeric Keypad
When the keypad is displayed, you can use your remote to enter letters in lower or upper case, numbers, punctuation,
and symbols.
There are two ways to enter characters, in the ABC mode and in the XT9 mode.
Method 1: Using the keypad of ABC type.
1. For example, suppose that you want to input “105Chang”.
2. Select TTX/MIX 3 times using your remote to change the input mode from lower case to numbers.
3. Select 1, 0 and 5 in numerical order.
4. Select TTX/MIX 3 times using your remote to change the input mode from numbers to upper case.
5. Select 2 three times using your remote to input C.
6. Input the rest of “Chang” using your remote in the same way. When done, select OK.
Method 2: Using the Keypad of XT9 type.
To change to XT9 mode, follow these steps:
A. With the Numerical keypad displayed, open the Tools menu using your remote.
B. On the Tools menu, select XT9 text input.
C. Select On, and then select OK.
For example, suppose that you want to input “105Chang”
1. Select TTX/MIX 3 times using your remote to change the input mode from lower case to numbers.
2. Select 1, 0 and 5 in numerical order.
3. Select TTX/MIX 3 times using your remote to change the input mode from numbers to capitalized case.
4. Select in sequence: 2, 4, 2, 6, 4. A thin window appears at the top of the screen displaying a list of words you
can enter.
✎
If “Chang” is not displayed in the list, select + to create your own the dictionary. Add your own word to your
dictionary.
To Next Page
Loading...
