• Service Manager
Auto Ticker: You can set Auto Ticker to come on when the product powers.
✎
The Ticker application provides useful News, Weather, and Stock Market information. Before you can set the
Auto Ticker on, you must download the Ticker application into Smart Hub.
✎
Depending on your country, the Ticker application may have a different service or not be supported.
Push Notification Settings: When on, Push Notification that displays a notification message when an event takes
place in an application installed on Smart Hub. The product will display the notification message and allow you to
view details of the event even while you are viewing product.
• Reset
The Reset function initializes all downloaded applications, erases all user accounts and settings from the product,
and resets all Smart Hub settings to the factory default settings. It then restarts Smart Hub as if it were starting for
the first time.
Your account, however, remains on the Smart Hub server. To log into your account, enter your ID and password on
the Login screen.
To use the Reset function, follow these steps:
1. In the Settings menu, select Reset. The Reset screen appears.
2. Enter the security PIN using your remote.
✎
The default PIN set is “0-0-0-0.”
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode,
which resets the PIN to “0-0-0-0”: MUTEM → 8 → 2 → 4 → P (Power on).
3. After a few moments, Smart Hub automatically resets. The screen may go black, and then Smart Hub
reappears. In a few moments, it starts the re-initialization procedure.
4. To complete the re-initialization, go to Step 2 in "To start Smart Hub for the first time, follow these steps:" section
of this manual. (page 98)
• About Smart Hub
The About Smart Hub menu contains functions that display information about Smart Hub.
More: Lists information about Smart Hub version, Memory Usage, and the Unique ID.
Terms of Service Agreement: Displaythe Terms of Service Agreement.
To Next Page
Loading...
