Creating an Event
You can create a record of an event, such as a birthday party or a wedding, with pictures, that all group members can
see. You can also create a record for a future event.
To create an event, follow these steps:
1. Attach a USB device containing the pictures of the event that you want to upload to your Family Story.
2. Log into your Smart Hub account, and then start Family Story.
3. Highlight and select the "create event" display on the right side of the Family Story screen or select b Create
using your remote. The Create screen appears.
4. On the Event tab, highlight and select the Event title field. The Event title screen and keyboard appear.
5. Use your remote to highlight and select letters. If you have a USB or Bluetooth keyboard attached to the
product, use the keyboard to type in letters.
6. When done, select OK on the on screen keyboard, press E on your remote. If you are using a physical
keyboard, press ENTER on the keyboard.
7. Highlight and select Done on the Event title screen with your remote. The Event Tab reappears.
8. User your remote to highlight and select the "enter description field. The Enter Description screen and keyboard
appear.
9. Enter a description of the event the same way you entered the Event title in Step 5. When done, close the Enter
Description screen the same way you closed the Event title screen in Steps 6 and 7.
10. Highlight and select the From field. The Time Settings screen appears. Use the up and down arrow buttons on
your remote to change the values in each field. Use the left and right arrow buttons to move from field to field.
Press E when done.
11. Hightlight and select the To field. The Time Settings screen appears. Set the To time the same way you set the
From time in Step 10.
12. To define the Event Type, highlight and select the Change button. The Event Type list appears.
13. Use the up and down arrow buttons on your remote to select an event type. When done, press E. The Event
Tab re-appears.
To Next Page
Loading...
