WiDi Connection
1. From the Source screen, select Intel® WiDi.
2. On your desktop, launch Intel ® WiDi (
).
✎
As soon as the Programme starts, it searches for available adapters.
3. Select the correct adapter for the Programme and press "Connect".
✎
If the adapter of your choice is not found, press "Search for available adapters".
✎
If the search result has more than 2 match, check the product ID that you want to connect to.
4. Enter the security code into the WiDi Programme on your laptop computer. Note that the security code will only be
displayed on the screen when fi rst run.
5. A connection has been established with your laptop computer. Now you can use the WiDi feature to transfer data
wirelessly.
Usage Conditions
• Frequency: 2.4G / 5G
• Effective Range: 0.5m ~ 3m (max. 10m) - required to minimize the electric interference
• Operation: Since the WiDi technology uses a compression codec system for communications purposes, you may
encounter a delay in the transmission or a corrupt image on the screen. Therefore, it is advisable to use a wired port
(HDMI or PC port, if any) to guarantee a stable, optimal performance.
To Next Page
Loading...
