Picture Options
Menu → Picture → Picture Options
Using this function, you can configure additional picture settings to suit your preference.
✎
When your product is connected to a PC, you can only make changes to Colour Tone.
• Colour Tone
Cool makes the picture bluer (cooler). Warm1 and Warm2 make the picture redder (warmer).
✎
Warm1 and Warm2 are deactivated when the Picture Mode is set to Dynamic.
✎
You can adjust and store settings for each external device connected to an input on the product.
• Digital Noise Filter
If the broadcast signal received by your product is weak, you can activate the Digital Noise Filter feature to reduce
any static and ghosting that may appear on the screen.
Auto Visualisation: When changing analog channels, displays signal strength.
✎
When the signal is weak, try all the options until the product displays the best picture.
✎
Only available for analog channels.
✎
When the bar is green, you are receiving the best possible signal.
• MPEG Noise Filter
Reduces MPEG noise to provide improved picture quality.
• HDMI Black Level
Lets you adjust the screen depth by selecting a black level.
✎
Available only in HDMI mode.
• Film Mode
Sets the product so that it senses and then processes film signals from all sources automatically and adjusts the
picture for optimum quality.
✎
Available in TV, AV, Component (480i / 1080i) and HDMI (1080i).
Reset Picture
Menu → Picture → Reset Picture
Resets your current picture mode to its default settings.
To Next Page
Loading...
