Channel and Broadcast Issues
When the TV has difculties receiving broadcasts, these steps may help resolve the problem.
The problem Try this!
“Weak or No Signal” displayed in TV
mode or cannot nd channel.
Make sure that the external device is connected securely and turned on. Move
to Sources to switch to other input sources.
• Source Sources
When using a set-top box or cable box, check the broadcast signals or the
network that is connected to the external device.
The TV is not receiving all channels.
Conrm that the coaxial cable is securely connected to the TV.
Run Reset or Auto Program.
•
Settings General Reset
• Settings Broadcasting Auto Program
The captions are not provided on a
digital channel.
I want to turn off the captions.
When watching channels with the antenna cable connected, run Caption
Settings.
•
Settings General Accessibility Caption Settings
Some channels may not have caption data.
When watching a channel on an external device such as set-top box and cable
box, turn on the caption function on the device. For more information, contact
your service provider.
Broadcasting is deactivated.
Broadcasting is only available when Source is set to TV.
Broadcasting cannot be accessed while you watch TV using a cable box or
satellite box.
- 119 -
To Next Page
Loading...
Need help?
General
