English - 19
04 Initial Setup
When you turn on your TV for the first time, it immediately starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your viewing environment.
࡙ To perform the Initial Setup using the SmartThings app, you must connect your mobile device via Wi-Fi.
࡙ If the pop-up for setup does not appear automatically in the SmartThings app on your mobile device, manually add
the TV using Add Device on the dashboard of the SmartThings app, and then continue with the set up process.
࡙ The SmartThings app is available for mobile devices running Android 6.0 or higher or iOS 10 or higher.
࡙ Noise may occur temporarily when the TV communicates with mobile devices.
࡙ TV setup has been optimized for Landscape mode.
Using the TV Controller
You can turn on the TV with the TV Controller button at the top left of the TV, and then use the Control menu. The
Control menu appears when the TV Controller button is pressed while the TV is On. For more information about its
usage, refer to the figure below.
Control menu
:
Power Off
:
Volume Up
:
Channel Up
:
Volume Down
:
Channel Down
:
Source
TV Controller button / Remote control sensor
࡙ TV mode
፯ Press: Move
፯ Press & Hold: Select
࡙ Art mode
፯ Press: Switch to the TV mode
The TV Controller button is located on the top left of the TV.
࡙ In Art mode, the power indicator at the top left of the TV remains off.
@
G
(J
e
CD
@
t----~
00@
®CD0
To Next Page
Loading...
Need help?
General
