Samsung M110 - Setup Menu Operations; Start-up Image Settings; LCD Brightness Settings

Off
73
Quick view
If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
- Sub menus
[Off] : The quick view function
can’t be activated.
[0.5, 1, 3 sec] : The captured image is
briefl y displayed during the
selected time.
LCD save
If you set the [LCD save] to On and the camera isn’t operated during the
specifi ed time, the LCD monitor will be turned off automatically.
- Sub menus
[Off]
: The LCD monitor will not be turned
off.
[On]
: If the camera isn’t operated during
the specifi ed time (about 30 SEC.),
the camera power will be idle
(Camera status lamp:Blinking)
automatically.
K You can’t set the [LCD save] menu of Playback Mode.
Start up image
You can select the image that is fi rst displayed on the LCD monitor whenever
the camera is turned on.
- Sub menus : [Off], [LOGO], [User Image]
- Use a saved image for the start-up image
with the [Start Image] in the [RESIZE]
menu in the play mode.
- The start-up image will not be deleted by
[Delete] or [Format] menu.
- The User images will be deleted by [Reset] menu.
LCD brightness
You can adjust the LCD brightness.
- Sub menus : [Auto], [Dark], [Normal],
[Bright]
DISPLAY ( )
Off
1sec
3sec
0.5sec
Back Set
DISPLAY
Language
Date & Time
Start Image
LCD Bright
Quick View
LCD Save
Back Set
On
Off
Language
Date & Time
Start Image
LCD Bright
Quick View
LCD Save
DISPLAY
DISPLAY
Language
Date & Time
Start Image
LCD Bright
Quick View
Back Set
LCD Save
Back
Language
Date & Time
Start Image
LCD Bright
Quick View
LCD Save
Set
DISPLAY
Bright
Dark
Normal
Auto