Selecting the Automatic Operating Mode
In the Automatic mode, the room temperature and the fan speed
are controlled automatically.
1
If necessary, press
(ON/OFF) button.
Result:
The On/Off indicator on the function controller
comes on.
The air conditioner runs in the mode selected
when the unit was last used.
Caution
The air conditioner is fitted with a protection
mechanism to prevent the unit from being damaged
when it is started immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2
To select the AUTO mode, press the Mode button until
is
displayed at the top of the function controller.
Result:
The air conditioner runs in AUTO mode.
Note
You can change modes at any time.
3 To adjust the temperature, press the Temperature buttons
one or more times until the required temperature is displayed.
Possible temperatures are between 18°C(65°F) and 30°C(86°F)
inclusive.
Result
:
Each time you press Temperature buttons:
- The temperature is adjusted by 1°C(1°F).
The air conditioner starts cooling, provided
that the room temperature is than the selected
temperature.
- The quantity of air is adjusted automatically.
To Next Page
Loading...
