Samsung MD40C - Network; Network Settings; Connecting to a Wired Network

117
Network
Chapter 08
Connecting to a Wired Network
There are three ways to attach your product to your LAN using cable.
•
You can attach your product to your LAN by connecting the LAN port on the back of your product to an external modem
using a LAN cable.
See the diagram below.
RJ45
The Modem Port on the Wall
External Modem
(ADSL / VDSL)
Modem Cable LAN Cable
LAN
•
You can attach your product to your LAN by connecting the LAN port on the back of your product to an IP Sharer which
is connected to an external modem. Use LAN cable for the connection. See the diagram below.
The Modem Port on the Wall
External Modem
(ADSL / VDSL)
IP Sharer
(having DHCP server)
LAN
Modem Cable LAN Cable LAN Cable
RJ45
―
Use Cat 7 cable for the connection.
Network Settings
MENUm → Network → Network Settings → ENTERE
Network Settings
No network cable or Samsung Wireless LAN Adapter
connected.
Please plug in a network cable or a Samsung Wireless LAN
Adapter.
Start
Cancel
-
The displayed image may differ depending on the model.