Samsung MIM-D01AN - Page 105

E-105
22
To add output, click [Add].
After adding the output, you must tick the check box.
X If you want to delete output which you don't use anymore, select it and then click
[Delete].
23
Click [Save].
X Set control logic will be saved in DMS2.5.
X If you do not click [Save], changed setting will not be saved.
Note XControl logic input items consist of factor, comparison operator, standard value
and duration time.
XYou can enter up to 3 input items of control logic, and the items can be connected
with compound factor.
XOutput item of control logic consists of factor and command value.
XYou can enter up to 20 output items of control logic.
XYou can create up to 256 control logics.
22
23