E-67
Zone Setting & Edit – Individual/Group Initialization
1
Click [Zone management] £ [Zone Setting & Edit] when DMS2.5 web page menu screen
appears.
X Same screen will be displayed even if you click [Zone management] only.
2
Initialize the indoor unit organization as individual by clicking [Individual].
X
Individual initialization reorganizes connected indoor unit based on installation address.
3
Initialize the indoor unit organization as group by clicking [Group].
X Group initialization reorganizes connected indoor unit based on RMC address.
X
After group initialization, indoor units are displayed as one device when
upper zone is selected in the [Control and Monitoring] screen.
X
When editing zone after group initialization, moving in group is only allowed.
X After group initialization, subordinate devices cannot be moved individually to
the other zone.
Note
X Only the user who has authorization to edit all zones can use zone initialization.
- To the user who has no authorization to use zone initialization and manage
structure, button will not be displayed.
X If the user does not have authorization to edit zone, [Individual], [Group] and
[Zone edit] will not be displayed.
1
3
2
Zone Management
To Next Page
Loading...
