E-65
Outdoor unit control
Control for Occupied/Vacant room
1
Click [Control and Monitoring] £ [Outdoor unit control] when DMS2.5 web page menu
screen appears.
2
Click [Edit] and select the desired setting for Electric current control option, Heating
capacity calibration and Cooling capacity calibration.
X Outdoor unit self-control: Outdoor unit controls the value itself.
X Manual: Outdoor will be controlled at value set by the user.
3
Click [Save] and the outdoor unit will be controlled at set value.
X If the value was set manually on DMS2.5, outdoor unit will always operate at set
value.
Note
XOutdoor unit control is supported on certain models only, and the 'Outdoor unit
control page' only appears on those supported models.
1
Click [Control and Monitoring] £ [Occupied/Vacant room control] when DMS2.5 web
page menu screen appears.
2
Click [Edit] and select the desired setting for Mode, Desired temperature, Fan speed
and Apply.
3
Click [Save] and the unoccupied room will be controlled at set value.
Note
X The ‘Occupied/Vacant room control page’ only appears on those supported
models.
X
will appear on the indoor unit icon on [Control and Monitoring] screen, if the
indoor unit is unoccupied.
1
3
2
To Next Page
Loading...
