E-14
Set the current time of DMS2.5 system.
X “2016/01/01 01:01:01” is factory setting. Set the current time as DMS2.5 system time.
You can set DMS2.5 time in [System Settings] [System environment setting]
(Refer to page 129~130)
Starting DMS2.5
Current time setting
Connecting devices
(1) Make sure the connection of communication cables(R1/R2) between DMS2.5 and other
devices such as outdoor units, control devices.
(2) E
xecute tracking.
X DMS2.5 communicates with outdoor unit and brings information about installed
indoor unit and outdoor unit.
X
After tracking, you can use indoor unit control and other menu.
X
For tracking, refer to [System Settings] [Tracking] (Refer to page 148~152)
Connecting OnOff controller & outdoor unit
Starting DMS2.5
Access to DMS2.5 & Login
Address bar
If DMS2.5 time does not set as the current time, DMS2.5 may cause malfunction
when using Schedule or control logic management.
To Next Page
Loading...
