Samsung MIM-D01AN - Page 138

E-138
1
Click [System Settings] £ [System environment setting]
when DMS2.5 web page menu screen appears.
2
Click [Edit] on Control and Monitoring section.
3
Select 'Decimal point control' or 'Display the revised temp. in
heat mode'.
X Decimal point control: Select this function if you want to
control the indoor unit in 0.1°C unit. If this is not selected,
temperature will be adjusted in 1°C even if the indoor unit
supports decimal point control which allows temperature
adjustment in 0.1°C unit.
X Display the revised temp. in heat mode: Select this
function if you want to display the revised temperature for
current temperature in heat mode.
4
Click [Save].
Setting Control and Monitoring
2
3
4
1
System Settings (Continued)