E-148
X
What is tracking?
Tracking is an operation that finds devices which are connected to DMS2.5.
Through tracking operation, devices which are connected to DMS2.5 can recognize if they
ar
e connecting to DMS2.5.
To supervise and control system air conditioner using DMS2.5, tracking should be done first.
X
Things you can do through tracking
Checking the number of devices installed, setting communication mode by channel, DVM
tr
acking, Renaming is possible through tracking.
X
Execute tracking
(1) Connect DVM device
- Connect the device to COM1~COM5.
(2) Set communication mode by channel.
- Set proper communication mode which fits to the devices connected in step (1).
- Be careful that if communication mode is not properly set, the device will not be
found through tracking.
(3) Execute tracking - Execute DVM tracking.
- DVM tracking is an operation that finds system air conditioner devices such as indoor/
outdoor unit, watt-hour meter.
(4) Name setting for each device.
- Name setting for each device is a function that sets the name of connected devices.
Set the name which shows installation location of the device.
X
Communication mode setting by channel
Roles
- It records what devices are connected to COM1~ COM5 of DMS2.5.
- Through tracking, DMS2.5 searches proper devices which fits to user’s setting.
- Select proper communication mode which fits to connected device.
What is communication mode?
- Outdoor unit, OnOff controller, SIM, PIM can be connected to DMS2.5.
- Following is the list of devices that can be communicated through each communication
mode.
O
NEW mode: OnOff controller, outdoor units, and SIM/PIM which support
new communication mode.
O
IM mode: IM mode cannot be set, but it can be used for function change or new function
with an updated version.
System Settings (Continued)
Tracking
To Next Page
Loading...
