Monitoring Indoor Unit Operation Status
1
1
Click [Control and Monitoring] when DMS2.5 web page menu screen appears.
X [Control and Monitoring] screen will appear when you log-in to DMS2.5 web page.
2
Check the current status of all devices.
X You can check the current controlling status of all installed indoor units, ERV, AHU,
ERV PLUS, Fresh duct, Hydro Unit, Hydro Unit HT, Single EHS, DVMCHILLER, FCU Kit
a
nd other devices.
Note
X When the advanced functions (such as Sleep mode, Energy saving function)
are selected through wired/wireless remote controllers or indoor unit panel,
set operation mode on the remote controllers and DMS2.5 may be displayed
differently. Also, when controlling by DMS2.5, additional functions will be
canceled.
X
Depending on the model of indoor unit, Horizontal/All air flow direction control
may not be possible. In this case, vertical or fixed flow will be displayed depending
on indoor unit’s basic operation specification.
2
Some functions available on DMS2.5 web page may not be functional at BACnet
Gateway and LonWorks Gateway. For detailed function, refer to the installation
manual or contact Samsung Electronics.
E-21
To Next Page
Loading...
