E-41
7
Select Heat upper limit and Cool lower limit by clicking [S] [T].
8
Select [coolonly] or [heatonly] button.
9
Click the button to turn on/off the power for direct heat
water.
X You can turn on the power for direct hot water only when
the operation mode is on Auto or Heat mode.
10
Select desired temperature for hot water by clicking [S] [T].
11
Select desired operation mode for hot water.
X Select the operation mode from Eco/Standard/Power.
12 Select DHW upper temperature limit by clicking
[S] [T].
Note
X Since the Hydro Unit and Hydro Unit HT does not
have any filters, filter monitoring and filter reset is
not available.
To Next Page
Loading...
