E-58
Cycle Monitoring
You can select an indoor unit and check cycle information.
1
Click [Control and Monitoring] £ [Cycle Monitoring] when DMS2.5 web page menu
screen appears.
2
Click [Select].
X
DMS2.5 installation information will be displayed.
3
Select a device to check cycle information.
X
If you select OnOff controller, its subordinate outdoor unit which has the earliest
address will be selected.
X If you select an outdoor unit, all the information of the module (that are connected
to the selected outdoor unit) will be displayed.
X
If you select indoor unit, upper outdoor unit will be selected.
4
Cycle information of selected outdoor unit and subordinate indoor units.
X
If the status of outdoor unit and indoor unit is changed, status value turns into blue.
Control and Monitoring (Continued)
1
2
3
To Next Page
Loading...
