E-71
5
Click [Remove disappeared] to remove all disappeared devices which were found
after tracking.
6
Change zone properties.
X You can select “General”, “AHU”, and “Group”.
7
Click [Apply].
X Edited zone structure will be applied.
8
To cancel the setting, click [Cancel].
Mode Property name Description Remarks
Individual
initialization
mode
General
䯼
Virtual group which is managed by
installation address, not by RMC
address
䯼
The user can create and delete zone.
-
Group
Not applicable.
( Only supported in group initialization
mode.)
Not applicable.
(
Only supported in group initialization
mode.)
AHU
䯼
Virtual group which manages AHU kit
in general zone.
䯼
The user can create and delete.
䯼
It will be displayed as single device in
the control and monitoring screen, and
it can be controlled as single device.
䯼
You cannot move subordinate device
to the other zone.
Group
initialization
mode
General
䯼
V
irtual group which is set and
managed by the user.
䯼
The user can create and delete.
-
Group
䯼
Virtual group which is managed by
installation address, not by RMC
address.
䯼
The user cannot create and delete.
DMS2.5 creates it automatically.
䯼
It is displayed like as one device in the
control and monitoring screen and can
be controlled.
䯼
You cannot move subordinate device
to the other zone.
AHU
䯼
Virtual group which manages AHU kit
in general zone.
䯼
The user can create and delete.
䯼
It is displayed like as one device in the
control and monitoring screen and can
be controlled.
䯼
You cannot move subordinate device
to the other zone.
To Next Page
Loading...
