E-98
6
5
5
Select a factor in the input list.
X
Factor means the target to be controlled or standard item of logic decision.
6
Select the type of factor.
X
Single: It means 1 device.
Ex) Desired temperature of indoor unit
X
Arithmetic: It means 2 devices are connected by arithmetic operator.
Ex) Desired temperature of indoor unit 1 – Desired temperature of indoor unit 2
X
Function: It means several devices are using as value of function.
Ex)
Average(Current temperature of Indoor unit 1, Current temperature of
Indoor unit 2, Current temperature of Indoor unit 3)
Control Logic Management (Continued)
To Next Page
Loading...
