I
NTRODUCTION
1.6
Understanding the Control Panel
On Line/Error and Toner Save LEDs
LED Description
If the
On Line/Error
lights green, the printer is ready to
print.
If the
On Line/Error
lights red, the printer is experiencing
an error, such as jammed paper, no paper, the open top or
front cover, or the empty toner cartridge.
See “Troubleshooting Error Messages” on page 5.16.
If you press the
Cancel
button while the printer is receiving
data, the
On Line/Error
LED blinks red to cancel printing.
In Manual Feed mode, if there is no paper in the tray, the
On
Line/Error
LED blinks green.
Load paper into the tray and the LED stops blinking.
If the printer is receiving data, the
On Line/Error
LED slowly
blinks green.
If the printer is printing the received data, the
On Line/
Error
LED blinks green fast.
To Next Page
Loading...
