Samsung ML-1610 Series User Manual

I NTRODUCTION
1.7
1
Cancel button
If you press the Cancel button in Ready mode, this LED is on
and the Toner Save mode is enabled.
If you press this button once again, this LED is off and the
Toner Save mode is disabled.
If the
On Line/Error and Toner Save LEDs blink, your
system has some problems.
To solve the problem, see “Troubleshooting Error Messages”
on page 5.16
LED Description
Function Description
Printing demo page
In Ready mode, press and hold this button for about 2
seconds until all LEDs blink slowly, and release.
Manual feeding Press this button each time you load a sheet of paper in the
tray, when you select
Manual Feed for Source from your
software application.
For detailed information, see “Using Manual Feed Mode” on
page 3.7.
Canceling print job Press this button during printing. The On Line/Error LED
blinks while the print job is cleared from both the printer
and the computer, and then return to Ready mode. This
may take some time depending on the size of the print job.
In Manual Feed mode, you can’t cancel the print job by
pressing this button.
For detailed information, see “Using Manual Feed Mode” on
page 3.7.
Toner Save mode
on/off
In Ready mode, press this button to turn the Toner Save
mode on or off.
For detailed information, see
Software User’s Guide and
page 4.5.

Samsung ML-1610 Series Specifications

General

Print Technology	Laser
Monthly Duty Cycle	Up to 5, 000 pages
Connectivity	USB 1.1
Processor	150 MHz
Memory	8 MB
Print Speed	16 ppm
Print Resolution	600 x 600 dpi
Input Capacity	150-sheet input tray
Output Capacity	100 sheets
Supported Paper Sizes	A4, A5, Letter, Legal, Executive
Supported Media Types	Plain, Transparencies, Labels, Envelopes
Operating System Compatibility	Mac OS