Samsung ML-1610 Series User Manual

S OLVING P ROBLEMS
5.6
Clearing Paper Jams
Occasionally, paper can be jammed during a print job. Some of
causes include:
• The tray is overfilled.
• The front cover has been opened during a print job.
• Paper that does not meet paper specifications has been used.
See “Paper Specifications” on page 6.3.
• Paper that is outside of the supported size range has been
used. See “Paper Specifications” on page 6.3.
If a paper jam occurs, the
On Line/Error LED on the control
panel lights red. Find and remove the jammed paper. If it is
invisible, look inside the printer.
In the Paper Exit Area
Note: Paper jams in this area may result in loose toner on the
page. If you get any toner on your clothes, wash them in cold
water as hot water will set the toner into the fabric.
1 If the paper jams as it exits to the output tray and a long
portion of the paper is visible, pull the paper straight out.
When you pull the jammed paper, if there is resistance and
the paper does not move immediately, stop pulling.
Continue with the next step.

Samsung ML-1610 Series Specifications

General

Print Technology	Laser
Monthly Duty Cycle	Up to 5, 000 pages
Connectivity	USB 1.1
Processor	150 MHz
Memory	8 MB
Print Speed	16 ppm
Print Resolution	600 x 600 dpi
Input Capacity	150-sheet input tray
Output Capacity	100 sheets
Supported Paper Sizes	A4, A5, Letter, Legal, Executive
Supported Media Types	Plain, Transparencies, Labels, Envelopes
Operating System Compatibility	Mac OS