1) After receiving the print command, the printer feeds
paper from the main or optional second cassette or man-
ual feeder as required.
2) The paper being fed passes the paper feed sensor.
(Jam 0 occurs if the sensor is not operated within a
certain time)
3) Having passed the paper feed sensor the paper moves
to the paper exit sensor via printing process. (Jam 1
occurs if the sensor is not operated within a certain time)
4) The paper then passes through the paper exit sensor
and out of the set. (Jam 2 occurs if the trailing edge of
the paper does not pass the exit sensor within a certain
time of the paper leading adge activating the exit sensor)
<Jam0>
<Jam1>
<Jam2>
To Next Page
Loading...
Need help?
General