Adjustment and Troubleshooting
Service Manual
4-37
Samsung Electronics
13) Stains on Back of Page
Description: The back of the page is stained at 57 or 92 mm intervals.
2. 92mm : Pressure roller is
contaminated.
1. 57mm : Transfer roller is
contaminated.
Perform the OPC Cleaning Mode
Print 2 or 3 times. Run Self-Test to
remove the contamination of the
transfer roller.
1. Replace the transfer roller if
contaminated severely.
2. Disassemble the fuser and clean
the H/R(Heat Roller) and P/R
(Pressure roller). And check the
area between H/R and Thermistor.
If contaminated, clean the area
not to be deformed.
To Next Page
Loading...
