Reset method
1. In Dos Prompt ty pes "Usblist2 [ Rom file name] " and Press
Enter
2. In LCD "Flash Upgrade..." message will be show up.
3. In LCD "Update Image Please Wait..." message will be
show up.
4. When download complet e, set will be automatically p ower
On/O ff and it' ll Warming Up
LCD Panel
Boot
Download
method
1. In LCD "Update Image Please Wait..." message will be
show up.
2. In LCD message Ready¡ Printing then print out
configuration page
3. Check th e OS version and total pa ge value is "0"
4. Please set power On/ Off
LCD Panel
1. While Pressing Stop k ey, Power O n the Print er
2. After verify the m essage "Download Mode Press Stop key"
Press Stop Key
3. Verify the m essage "Download Mode Plese Send IMG..."
4. In Dos Prompt ty pes "Usblist2 [ Rom file name] " and Press
Enter
5. In LCD "Update Image Please Wait..." message will be
show up.
6. When download complete, set will be automatically power
On/O ff and it' ll Warming Up
LCD Panel
Normal
Download
method
Firmware download method
To Next Page
Loading...
