Samsung ML-3471ND - LSU

Samsung Electronics
Service Manual
Disassembly and Reassembly
3-28
3.25 LSU
1. Before you remove the LSU, you should remove:
- Top Cover (Refer to 3.7)
- Side Cover (Refer to 3.9)
2. Remove the four screws securing the LSU and
remove it.
LSU
3.26 TERMINAL
1. Before you remove the CRUM2 PBA, you should
remove:
- Top Cover (Refer to 3.7)
- Side Cover (Refer to 3.9)
- LSU (Refer to 3.25)
2. Remove the one screw securing the CRUM2 PBA
and remove it and then release the four Terminals,
as shown below.
Notice : Be aware of the Terminals to ensure they are
not lost.
CRUM2 PBA
Terminal