Adjustment and Troubleshooting
Service Manual
4-17
Samsung Electronics
In the tray 1
1. Pull the tray 1 open.
2. Remove the jammed paper by gently pulling it
straight out. Make sure that all of the paper is
properly aligned in the tray 1.
If the paper does not move when you pull, or if you
do not see the paper in this area, check the fuser
area around the toner cartridge.
3. Insert the tray 1 into the printer until it snaps into
place. Printing automatically resumes.
In the optional tray 2
1. Pull the optional tray 2 open.
2. Remove the jammed paper from the printer.
If the paper does not move when you pull, or if you
do not see the paper in this area, stop and go to
step 3.
3. Pull the tray 1 half.
4. Pull the paper straight up and out.
5. Insert the trays back into the printer. Printing
automatically resumes.
In the multi-purpose tray
1. If the paper is not feeding properly, pull the paper
out of the printer.
2. Open and close the front cover to resume printing.
4.1.7.2 In the paper feed area
To Next Page
Loading...
