Adjustment and Troubleshooting
Service Manual
4-19
Samsung Electronics
5. Release the blue strap, the rear cover stopper, and
fully open the rear cover, as shown.
6. Unfold the duplex guide fully.
7. While pushing the fuser lever to the right, open the
fuser door.
8. Pull the jammed paper out.
If the jammed paper does not move when you pull,
push the pressure lever on each side up to loose
the paper, and then remove it.
9. Return the lever, door, stopper, and guide to their
original position.
10. Close the rear cover. Printing automatically
resumes.
To Next Page
Loading...
