ENG
16
The timer enables you to switch the system on or off at specific times
automatically.
Example: You wish to wake up to music every morning.
Before setting the timer, check that the current time is correct.
◆
For each step, you have a few seconds to set the required options.
◆
If you exceed this time, you must start again.
If you no longer want the system to be switched on or off
➣
automatically, you must cancel the timer by pressing the TIMER ON/OFF
button.
Switch the system on by pressing the
1
POWER ( ) button.
Press the
2
TIMER/CLOCK button until TIMER is displayed.
Press
3
the ENTER ( ) button.
Result: ON TIME is displayed for a few seconds, you can set the timer
switch-on time.
Set the timer switch-on time.
4
a Press the TUNING/ALBUM or button to set the hours.
b Press the ENTER ( ) button.
Result: The minutes flash.
c Press the TUNING/ALBUM
or button to set the minutes.
d Press the ENTER ( ) button.
Result: OFF TIME is displayed for a few seconds, you can now set the
timer switch-off time.
Set the timer switch-off time.
5
a Press the TUNING/ALBUM or button to set the hours.
b Press the ENTER ( ) button.
Result: The minutes flash.
c Press the TUNING/ALBUM
or button to set the minutes.
d Press the ENTER ( ) button.
Result: VOL XX is displayed, where XX corresponds to the
volume already set.
Press the
6
TUNING/ALBUM or button to adjust the volume
level and press the ENTER ( ) button.
Result: The source to be selected is displayed.
Press the
7
TUNING/ALBUM or button to select the desired
source to be played when the system switches on.
If you select... You must also...
FM/AM (radio) ..................... a Press the ENTER (
) button.
b Select a preset station by pressing the
TUNING/ALBUM
or button.
CD/MP3 (compact disc) ..... Load one compact disc.
USB1 ................................... Connect the USB device.
USB2 ................................... Connect the USB device.
Press the
8
ENTER ( ) button.
Result: CHECK REC (Do you want to record?) is displayed.
Press the
9
ENTER ( ) button.
Result: RECORD N is displayed, you can press the TUNING/ALBUM
or button to select the RECORD Y or RECORD N, and then
press ENTER button.
If you select the RECORD N, it will
1).
cancel tuner timing recording
even if you have already set the tuner timing recording.
If you select the RECORD Y, you can set the
2).
tuner timing recording.
Press the
a.
ENTER (
) button.
Result: ON is displayed for a few seconds, you can set the tuner
timing recording switch-on time.
Press the
b.
ENTER (
) button.
Result: OFF is displayed for a few seconds, you can set the tuner
timing recording switch-off time.
After having set the timer, it will start automatically as shown by the
TIMER indication on the display. If you no longer wish to use the timer,
you must cancel it.
To... Press the TIMER ON/OFF button....
Cancel the timer ........................ Once.
Result:
is no longer displayed.
Restart the timer ........................ Twice.
Result:
is displayed again.
Cancelling the Timer
Timer Function
To Next Page
Loading...
