Advanced Functions
Setting the Clock
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
f.
2.
Press the TIMER SET button on the remote
control twice "CLOCK SET" is displayed,
Press the ENTER ( _ ) button on the remote
controk The hour flashes,
o Increase the hours: TUNING/ALBUM A
Decrease the hours: TUNING/ALBUM V
3. When the correct hour is displayed, press the
ENTER ( E3' ) button, and then the minutes flash
Increase the minutes: TUNING/ALBUM A
Decrease the minutes: TUNING/ALBUM V
4. When the correct minute is displayed, press the
ENTER ( _ ) button, and then "TIMER PLAY
SET" appears in the display.
Setting the Timer
The timer enables you to switch the product on or
off at specific times automatically.
Before setting the timer, check that the current time
is correct,
. For each step, you have a few seconds to set the
required options, if you exceed this time, you must
start again,
. if you no longer want the product to be switched
on or off automatically, you must cancel the timer
by pressing the TIMER ON/OFF button,
ExamI_j_ You want to wake up to music every morn-
ing,
1. Pressthe TIMER SET button until TIMER PLAY SET is
displayed.
2. Pressthe ENTER (_) button.
Result: ON TIME is displayed for afew seconds. You
can set the timer switch-on time.
3. Set the timer switch-on time.
a Press the TUNING/ALBUM A or V button to
set the hours.
b Press the ENTER (_) button.
Result: The minutesflash.
c Press the TUNING/ALBUM A or V button to
set the minutes.
d Press the ENTER (_) button.
Result: OFF TIME isdisplayed for a few seconds.
You can now set the timer switch-off time.
4. Setthe timer switch-off time.
a Press the TUNING/ALBUM/k or V button to
set the hours.
b Pressthe ENTER ((:3') button.
Result: The minutes flash.
c Press the TUNING/ALBUM ^ or V button to set
the minutes.
d Pressthe ENTER ((3,) button.
Result: VOLUME XX is displayed, where XX corre-
sponds to the volume already set.
5. Pressthe TUNING/ALBUM A or V button to adjust the
volume leveland press the ENTER (_ ) button.
Result: The source to be selected isdisplayed.
6. Pressthe TUNING/ALBUM A or V button to select the
source the Hi-Fi Component will play when it switches
on.
If you select... You must also...
FM (radio) ................... a Pressthe ENTER ( E3')
button.
b Select a preset station by
pressing the TUNING/
ALBUM A or V button.
CD (compact disc) .....Load a compact disc.
USB ............................ Connect the USB device.
7. Press the ENTER ((3') button.
Result:TIMER RECSET (Doyou want to record?)is
displayed.
8. Press the ENTER (_) button.
Result: REC SET YES/NO is displayed. You can press
the TUNING/ALBUM A or V button to select
REC YES or REC NO, and then press
ENTER button.
1) Ifyou select REC NO, tuner timer recording will not
activate, even if you have already set the tuner timer
recording.
2) Ifyou ,selectREC YES, you can set the tuner timer
recording on and off bmes.
a. Pressthe ENTER ( _ ) button.
Result: ON TIME is displayed for a few seconds.
You can set the tuner timer recording switch-
on time.
b. Pressthe ENTER ((:3') button.
Result: OFF TIME is displayed for a few seconds.
You can set the tuner timer recording switch-
off time.
14, English
To Next Page
Loading...
