Basic Functions
Selecting a Track
You can select a desired track while the disc is
being played.
Pressthe I.H buttonwithin3 secondsafterthe current
trackhasstartedplaying.
Pressthe I_ buttontwiceat bast 3 secondsafterthe
currenttrack hasstartedplaying.
To _ the next track
Pressthe _1 button.
the current track from the
Pressthe I_ button3 secondsafterthe currenttrack
hasstartedplaying.
To _ the track of your choice
Pressthe 144or _,+_1buttonto moveto a desiredtrack.
+ Youcanalsousethenumber(0~9)buttonsonthe
remote controlto select atrack.
Searching for a Specific Music Passage on
a CD
When listening to a CD, you can quickly search
for a specific music passage on a track.
ForwardSearch............................
BackwardSearch.........................
You can also press and hold the 1<4,_l buttons on
the product to automatically scan for a track,
Repeat One or All Tracks on a CD
You can repeatedly play a track, a group of
tracks, or an entire CD.
1. Press the REPEAT button on the remote
control.
Each time you press the REPEAT button, the
repeat mode will change as follows:
MP3: OFF_ TRACK_ DIR_ ALL _ RANDOM
CD: OFF_ TRACK_ ALL_ RANDOM
2. When you want to stop the repeat function,
press the REPEAT button until "OFF" is
displayed.
• OFF: Cancels repeatplayback
• TRACK: Repeatedlyplaysthe selectedtrack,
• DIR(DIRECTORY):Repeatedlyplays alltracks in
the sebcted folder,
• ALL: Repeatedly playsthe entire disc,
• RANDOM: Playstracks in random order,
A-B Repeat Playback
You can repeatedly play back a designated section
of a CD.
1. Press the REPEAT A-B button at the beginning
of the desired section.
+ 'RPT A' will be displayed
2. Press the REPEAT A-B button at the end of
the desired section,
+ 'RPT AB' will be displayed,
3. Tocancel REPEAT A-B function, press the
REPEAT A-B button again.
+ 'OFF' will be displayed,
The REPEATA-B function Jsavailable within a
track,
CD Programming
This function is not available during playback of an
MP3/WMA-OD.
+ You can program the playback order of up to 24
tracks of your choice
+ However,you must stop playingthe CD before
selecting tracks,
1. While in CD playback mode, press the STOP
(m) button to stop playing the CD.
2. Press the ENTER ( _ ) button to display the
message below:
. _E-I +,'_E,:
(01= program number, .... track number)
English 9
To Next Page
Loading...
