Samsung NETWORK DIGITAL VIDEO RECORDER - Setup Procedures; Main Menu Navigation; System Setup

4
CHAPTER 3
SETUP PROCEDURES
1. MAIN MENU SETUP
SETUP MENU
> SYSTEM SETUP
CAMERA SETUP
RECORD SETUP
SCHEDULE RECORD
EVENT LIST
HDD MANAGEMENT
LOAD DEFAULT
EXIT
Press the MENU button to go into the main menu.
Use the ▲ or ▼ button to select items.
Press the ◄ or ► button to confirm the selection.
Press MENU to escape to exit the set up mode.
Contents:
c
SYSTEM SETUP
System set up
d
CAMERA SETUP
Camera set up
3
RECORD SETUP
Recording set up
4
SCHEDULE RECORD
Schedule Recording set up
g
EVENT LIST
Event indexing
h
HDD MANAGEMENT
Hard disk management
i
LOAD DEFAULT
Return to factory setting
j
EXIT
Escape from the setup menu
2. SYSTEM SETUP
SYSTEM SETUP
> BUZZER DURATION 3SEC
VIDEO LOSS ALARM ON
HDD PASSWORD
SET TIME/DATE
EXIT
Press the MENU button to go into the main menu.
Use the ▲ or ▼ button to select items.
Press the ◄ or ► button to confirm the selection.
Press MENU to escape to exit the set up mode.
Contents:
c
BUZZER DURATION 3SEC (1-30)
Use ◄ or ► button to adjust the duration time of the buzzer action.
d
VIDEO LOSS ALARM
On for default
e
HDD PASSWARD
A password can be setup to protect the hard disk content. It needs to be entered in order
to perform a hard disk format. Initial number is 1111.
Use the view control button on the front panel to input the number.
is “1” , is “2” , is “3” , is “4”
f
SET TIME/DATE
Use the ◄ or ► button to select items.
Press the ▲ or ▼ button to increase / decrease the number.
g
EXIT