62
To activate AllShare Cast on your device:
1. From the Home screen, press (Menu)
and then tap Settings g More settings g
AllShare Cast.
2. In a single motion touch and slide the AllShare
Cast slider to the right
to turn it on.
Pairing to an AllShare Cast Hub
To pair your device and Hub for the 1st time:
1. Locate the AllShare Hub (dongle) name
displayed at the bottom of the TV (showing the
tutorial). Ex: Name: Dongle - XXXXXX.
2. Access your device’s AllShare Cast screen and
locate the same hub/dongle name in the list.
Tap Scan if necessary.
3. Verify your AllShare Cast Hub is on (blinking red
LED) and the on-screen tutorial is displaying on
the connected TV.
USC_T0_QRM_75X105.indd 62 9/27/2012 9:16:25 PM
To Next Page
Loading...
