64
To disconnect your device from the hub:
1. Access your device’s AllShare Cast screen and
locate the current connection.
2. Tap the entry and select Stop.
To reconnect your device again to an existing
hub:
1. Locate the AllShare Hub (dongle) name
displayed at the bottom of the TV (showing the
tutorial). Ex: Name: Dongle - XXXXXX.
IMPORTANT: Verify the LED is not a solid blue. This indicates there is
another device currently connected.
2. Access your device’s AllShare Cast screen and
tap the same hub/dongle name in the list.
3. Confirm the connection by making sure both
your TV and device show the same image/
screen.
USC_T0_QRM_75X105.indd 64 9/27/2012 9:16:25 PM
To Next Page
Loading...
