EasyManua.ls Logo

Samsung NP-X22 - Reinstalling When Windows Does Not Start

Samsung NP-X22
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
153
WhenWindowsdoesnotstart,bootupwiththeSystem
RecoveryCDandfromthereyoucanreinstallWindows.
1
InsertthesystemrecoveryCDintotheCD-ROM
drive and start the computer.
2
Ifthefollowingmessageappearsonthescreen,
pressanykeyfromthekeyboard.
3
Donotpressanykeyatthistime.Afterawhilethe
partitioncongurationscreenappears.Tonotchange
thepartition,pressEnter.
4
Selectthedesiredlesystem(format).Tomaintain
thecurrentlesystem,pressEnter.
5
SelectthefoldertoinstalltheWindowsoperating
system.TodeletethepreviousversionofWindows
andinstallinthecurrentfolder,pressL on the
keyboar.
6
Aftertheinstallationprocesscopiesthenecessary
foldersfortheWindowsinstallation,restartthe
system,andthemessage“Pressanykeytoboot
fromCD”isdisplayed.Youdonotneedtoenter
anything.Inamoment,theWindowsXPinstallation
screenwillappeartoproceedwiththeinstallation.
7
FollowtheinstructionsoftheWindowsXP
installationwizardtocontinuewiththeinstallation.
8
Whentheinstallationiscomplete,thecomputerwill
restart.Whenthesystemhasrestarted,thePress
anykeytobootfromCDmessageappears.
Ignore the message.
ThesystembootsandtheWindowsandWindows
Registrationscreenappears.RegisterWindows,following
theinstructionstonishtheWindowsinstallation.Remove
theSystemRecoveryCDandinstallthe
device drivers
and application programs using Standard Installation
from the System Software Media.
Reinstalling when Windows does not start
Press any key to boot from CD.....

Table of Contents

Related product manuals