Samsung NP-X22 - Wired LAN Related

159
Q
How do I receive a fax while the system is in
power saving mode (Rest mode)?
A Toreceiveafaxin
Standbymode,youhavetosetit
upasfollows.
 Theautomaticfaxreceptionfunctionofthe
faxprogramneedstobeactivated.(Formore
information,seethecorrespondingfaxprogram
manual.)
 ClickStart > Control Panel > Network and
Internet Connections.
 Under See Also,clickPhone and Modem
Options.
 In the Power ManagementtaboftheModem
Propertieswindow,selectthe“Withthisdevice,
exitthecomputerfromstand-bymode”itemand
thenclickOK.
Theabovesettingenablesthemodemtoturnon
thesystemandreceiveafaxwheninpowersaving
mode.
Q <Wake On LAN> function
A1 <WakeOnLAN>isafunctionthatactivatesthe
systeminrestmodewhenasignal(suchasping
ormagicpacketcommands)arrivesfromnetwork
(wiredLAN).
To use <Wake On LAN> function:
 SelectMy Network Places > View network
connectionsfromtheDesktop.
 Clicktherightbuttononthetouchpadover
Local Area Connection,andselectProperties.
 ClickCongure,andselectPower
Managementtab.Select“Allowthisdeviceto
bringthecomputeroutofstandby”,thenclick
OK.Restartthesystem.
–Whenturningthecomputeroffwhenthenetworkis
connectedwithoutselectingthe
<Wake On LAN>
function,the
LAN LEDmaynotbeturnedoff.
– The <Wake On LAN>functionisonlyavailable
whentheLANisturnedon.
–WhenconnectingawiredLANwhileusinga
wirelessLAN,the
<Wake On LAN>functionmay
not work. To use the <Wake On LAN>function,
select“DonotuseWirelessLAN.”
–ConnectingwiredLANwhileusingwirelessLAN
maynotexecute
<Wake On LAN> function.
CongurewirelessLANto“Disable”touse<Wake
On LAN> function.
Wired LAN Related