Samsung NP-X22 - Wireless Network Setup Using the Wireless LAN Setup Program

82
The procedures to connect to an access point using a
wirelessLANcongurationprogramaredescribed.Since
thewirelessLANcongurationprogramisincludedin
theSystemSoftwareMedia,theuserhastoinstallthe
program.
For Intel 802.11a/b/g, Intel 802.11n and
Intel 802.11bg
1
Insert the System Software MediaintotheCDdrive
andinstallthewirelessLANcongurationprogram
(PROSet).
2
 Double-clickthewireless LAN program ( )iconon
thetaskbar.(Or,clickStart > All Programs > Intel
PROSet Wireless > Intel PROSet Wireless.)
Toconnecttoanaccesspointorexistingcomputer-
to-computer(AdHoc)networkrefertothefollowing
procedures.
3
 InAvailableNetworks,clickonRefresh.
4
 Selectthenameofdesiredaccesspointorcomputer-
to-computernetworktoconnectfromthesearched
availablenetworkslist,andclickCongure.
Note
Ifyourdesirednetworkdoesnotappear,click
Refresh.
Anaccesspointisrepresentedbythe( )icon,and
acomputer-to-computernetworkisrepresentedby
the ( )icon.An( )iconisdisplayedinfrontofan
accesspointoracomputer-to-computernetwork
withconguredsecuritysettings.
5
Enter Prole NameandclickNext.
6
 IntheSearchSecuritySettingswindow,thewireless
networksecuritysearchmessagewillappear.
ClickNext.
Wireless Network Setup Using the Wireless LAN Setup Program