Samsung NP-X22 - How to Set up the Sharing Client

90
6
 Setupthedevicetobeconnectedtotheclientas
showninthegurebelowandclickNext.
Note
Becausethewirelessconnectionnameandnetwork
keyenteredinthesharingservermustbeenteredin
theclientaswell,rememberthem.
7
 CheckthesettingsandclickNext.
8
 ClickAdd Printerandsetupaprinterfollowingthe
instructionsinthewizard.
Onceprinteradditioniscomplete,clickRefresh.
SelecttheaddedprinterandclickComplete.
Note
Ifyoudon’twanttoaddaprinter,justclick
Completewithoutfollowingtheinstructionsinthe
wizard.
9
If the “Do you want to move to newly added
location now?”windowappears,clickNo.
Theaddedlocationiconiscreatedandsharing
serversetupiscomplete.Setupthesharingclient
next.
WhenyouuseInternetConnectionSharing,you
havetochangetheMcAfeeFirewallsettings.
p.164
How to Set up the Sharing Client
Thisdescriptionisdiscussedbasedonthewireless
connection to the sharing server. The sharing server has
tobeturnedonandthewirelessLANsinbothcomputers
havetobeactive.
1
Run Samsung Network Manager on a computer
thatwillfunctionasthesharingclient.
2
 ClickAdd.
3
 Selecttheiconthatshowsthenetworklocationand
enterthelocationname.ClickNext.
4
 SelectSharing Client (Wireless) andclickNext.
5
 EnterthevaluesintheWireless Connection Name
and Network KeyeldsintheSelectDevicewindow
andclickNext.
6
 CheckthesettingsandclickNext.