Samsung NP-X22 - Page 92

91
7
 ClickAdd Printerandsetupaprinterfollowingthe
instructionsinthewizard.Oncetheprinteradditionis
complete,clickRefresh.
SelectaprinterandclickFinish.
Note
Ifyoudon’twanttoaddaprinter,justclick
Completewithoutfollowingtheinstructionsinthe
wizard.
8
If the “Do you want to move to the added location
now?”windowappears,clickNo.
Iftheiconfortheaddedlocationappear,itmeans
thattheclientcongurationiscomplete.
IfyouclickYes,thecomputerconnectstothe
sharingserverandyoucanimmediatelyusethe
Internet.
To connect to the Internet from the
Sharing Client
1
 Checkifthesharingserverturnsonbecausethis
ismandatory.Ifyouconnecttothesharingserver
throughawirelessLAN,thewirelessLANofthe
servermustbeturnedon.
2
Run Samsung Network Manager on the sharing
clientcomputer.
3
 Clicktheiconforthelocationthathasbeensetas
thesharingclientintheSharedLocationwindowand
clickGo.
Onceamessageappearstoinformyouthatmoving
iscomplete,youcanusetheInternet.IftheInternet
isdisconnectedduringuse,clickWireless menus
> Reconnect Sharing in Samsung Network
Manager.Then,thenetworkwillbeconnected
again.