Samsung NP-X22 - Connecting to Wireless LAN

78
Connecting to Wireless LAN
IfanAPexistsnearyourlocation,youcaneasilyconnect
towirelessLANinthemethodprovidedbyWindowsXP.
IfyouusetheprogramprovidedbyawirelessLANcard
provider,connecttowirelessLANafterseeingpage 82
of this document.
ThefollowingdescriptionisbasedonWindowsXP
ServicePack2;thus,thepicturesmayvary.
1
 ClicktheWireless Network Connection
icon ( )fromtheTaskbarusingtherightbuttonof
thetouchpad.Then,clickView Available Wireless
Networks.
2
 SelectanAPtobeconnectedandclickConnect.
IfanetworkkeyissetintheAP,thenetworkkey
inputwindowwillappear.Enterthenetworkkeyin
theinputwindowandclickOK.
Note
Foranetworkkey,contactthenetworkadministrator.
3
 OnceConnected to APisdisplayed,youcanusea
wirelessnetwork.
To check the network connections
PlacethemouseontheWireless Network Connection
icon ( )fromtheTaskbar.Then,thestatuswillappear.