Samsung NP-X22 - Page 156

155
Q
When I connect a projector, and change the
setting to display screen image on both the LCD
and the projector by pressing Fn + ( ) keys,
screen is not displayed properly.
A Press
Fn + ( )keysonceagain.Ifthesame
problemcontinues,itmeanstheprojectorcannot
supporttheresolution.Lowertheresolutionto1024
x768.
Q
The Taskbar on the bottom of the screen does
not appear when a projector is used as the
display device.
A Thismayhappen,iftheprojectordoesnotsupport
LCDresolution.Inthiscasechangetheresolutionto
1024x768(recommended)onyourcomputer.
Q
Switching the MS-DOS command prompt to full
screen mode or Windows mode by pressing the
<Alt>+<Enter> keys does not operate properly.
A Pressingthe
<Alt>+<Enter>keysusinganUSB
keyboard,maycausethekeyinputtoberecognized
asmultiplekeyinputsdependingonthekeyboard
inputrecognitiontime.Inthiscase,theMS-DOS
commandpromptisrepeatedlyswitchedtofull
screenandthentoWindowsseveraltimes.Please
press the <Alt>+<Enter>keysmorequickly,orpress
the <Alt>+<Enter>keysusingthesystemkeyboard.
Q
The shortcut icons are not displayed on the
screen even if I press the shortcut key.
A TheshortcuticonsonlyappearwhentheEasy
DisplayManagerprogramisinstalled.
Q
The screen is rotated, but I cannot return it to the
original orientation.
A Thismayhappenwhenyouhaveusedthescreen
pivotfunctionorpressedawrongkeywhileusing
thecomputer.FornVidiaGraphics,right-clickthe
Windowsdesktop,thenclick
Nvidia Control Panel
fromthecontextmenu.SelectDisplay > Rotate
display and check one of the four options to return
totheoriginalorientation.
Q
The color is strange when the picture is displayed
on the connected monitor (or projector).
A Checkthemonitorsignalcableconnectionand
reconnectthecable.